In an effort to sort out the wealth of knowledge that we have in our hundreds of YouTube videos (and some gems from other channels) I am creating a list of them and categorizing them into groups to help you along your purchasing/learning journey.
These videos are intended for those that are new to CNC machining and need a little help understanding what you are doing.
Your First Day with Tormach’s PathPilot
Getting Started with Tool Tables in PathPilot
Getting Started with Work Offsets in PathPilot
Cutting Your First Part on a Tormach Mill
Probing Routines in PathPilot - YouTube
How to use a Haimer 3D Sensor for Mill Setup - Tormach CNC
Speeds & Feeds Tutorial for CNC Machines! WW164
Video List - PathPilot
Conversational Programming in Tormach’s PathPilot
PathPilot Quick Tips: Reorganizing Your Conversational Program
PathPilot Quick Tips: Conversational Drill and Tap
How to Cut Holes with CNC | Tormach
Tormach Tooling System Walkthrough
Do Set Screw Holders Push End Mill Tools off Center? WW122
How Much Does A $3 Collet Cost? - YouTube
Adding Tools to Your Tormach ATC with PathPilot
Tormach Machinist Tip - Basic Steps to Indicate (Square) a Vise
Strap Clamp Tips - Tormach CNC
Workholding for Round Parts: Samples of Chucks, Mandrels, Collets and more!
Basic CNC - Setting Up the Haimer Work Offset for Efficient Machining
How to Find the Center of Block with a Dial Indicator (Swing Indicating, Part 2 of 2) - Tormach CNC
5C Collet Workholding Tips for Mill- Tormach CNC
Indicating the Center of a Hole for Proper CNC Machining
Tormach Explains Tool Coatings
Overview on the Types of Drill Bits
Slotting Aluminum - Tips, Tricks, Speeds & Feeds | WW235
How to Choose Mold Making Materials and Tools
How To Cut Hard Metals With the DIJET High Feed End Mill
Testing Mini-Shear Roughing End Mills on the Tormach 770M
Shear Hog: New Favorite Endmill for the Tormach!
Making a Carbon Fiber Mold for a Corvette Intake on an 1100M
Engraving Tools: Speeds, Feeds, and Tips! | WW237
Getting Creative When You Run Out of Z-Height
I will continue to update this list as we make more content and I encourage you to post in the comments with other videos that helped you on your CNC journey.
In the mean time, check out the other video lists in this series:
Chapter 1 - Preparation/Machine Selection: Check out these videos when you are thinking about buying one of our machines.
Chapter 2 - Install: These videos cover the machine and accessory installation.
Chapter 3 - Getting Started: These videos are intended for those that are new to CNC machining and need a little help understanding what you are doing.
Chapter 4 - Advanced: Once you have made a few parts and are starting to feel comfortable and want to get a little frisky with your machine.