I have an 1100mx that needs to be moved 1hr away.
It is currently up and running sitting in a garage assessable by truck but does need to come apart to fit thru the garage door. Buford GA I have a custom pallet made for the heavy spindle section.
The new location is a 20’x15’ garage in Cleveland GA
My EX is challenging so I don’t want to be involved 
Suggestions for moving companies?
Bart Brejcha bart@designengine.com
“Rigging company" is what you are after. There are a few that cover Georgia.
Drop deck trailers are fantastic.
rigging. Great now I have something to google.
Another search term is “machinery movers”. Here in Illinois, I’ve found that most commercial riggers won’t do residential moves, possibly for liability/insurance reasons. One of the commercial riggers near me did point me to a small furniture/household mover that moves machines on the side, so that may be a possibility, too.
I moved my 1100m with a rental drop deck trailer and a pallet jack. Set the z axis down on blocks and removed the z axis motor.
A pallet jack moves them easily pull-out coolant tank jack fits right in a gate trucking company can do it band it up good
.
Watch out for narrower pallet jacks though– the stand on my 1100M was only barely supported on my pallet jack and bent some before I installed reinforcements to the sheet metal.
Pulling the Z motor was also needed to get mine under a low garage door.
I moved an entire 1100mx without removing anything except the top lights and z-axis servo. The machine was bolted onto a custom 4x4 pallet made of dimensional lumber. Transportation was via rollback wrecker.