# Tool Sequence on an 15L Slant Pro

**URL:** <https://forums.tormach.com/t/tool-sequence-on-an-15l-slant-pro/2748>\
**Category:** Lathe\
**Created:** [October 13, 2025, 4:17pm UTC](https://forums.tormach.com/t/tool-sequence-on-an-15l-slant-pro/2748 "2025-10-13T16:17:26Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Paul\_Bierker](https://forums.tormach.com/letter_avatar_proxy/v4/letter/p/f6c823/32.png) [@Paul\_Bierker](https://forums.tormach.com/u/Paul_Bierker)\
**Post date:** [October 13, 2025, 4:17pm UTC](https://forums.tormach.com/t/tool-sequence-on-an-15l-slant-pro/2748/1 "2025-10-13T16:17:27Z")

</div>

So my teacher says that , it seems like the lathe tools that are attached to the 8 station turret are not in the correct sequence anymore and need to be reprogrammed/recalibrated so that the machine selects the correct tool when the students run their programs.

Does anyone have any advice or the steps to accomplish this for the school I work in?

Thanks

---

<div class="post-metadata">

**Author:** ![nkowalczyk](https://forums.tormach.com/letter_avatar_proxy/v4/letter/n/9de053/32.png) [@nkowalczyk](https://forums.tormach.com/u/nkowalczyk)\
**Post date:** [October 13, 2025, 4:35pm UTC](https://forums.tormach.com/t/tool-sequence-on-an-15l-slant-pro/2748/2 "2025-10-13T16:35:14Z")

</div>

Paul,

There is no “reprogramming” of tool positions, each one is detected by a switch inside the turret. The switches aren’t readily accessible.

I would recommend opening a ticket with the Tech Support team here: [Jira Service Management](https://tormach.atlassian.net/servicedesk/customer/portals). I would recommend grabbing a video showing the issue, that would be one of the first things we ask for.

Thank you,  
Norman

---

<div class="post-metadata">

**Author:** ![Bruce\_Kuller](https://forums.tormach.com/letter_avatar_proxy/v4/letter/b/edb3f5/32.png) [@Bruce\_Kuller](https://forums.tormach.com/u/Bruce_Kuller)\
**Post date:** [October 17, 2025, 6:06pm UTC](https://forums.tormach.com/t/tool-sequence-on-an-15l-slant-pro/2748/3 "2025-10-17T18:06:07Z")

</div>

I loaded my tools 1-8  
Trigon roughing  
Neutral semi roughing  
Rh 25deg contouring  
Lh 25 deg contouring  
Top notch grooving  
Drilling  
Tapping  
Parting

Plus QCTP below axis.  
Works for 90% of the things I do.

---

<div class="post-metadata">

**Author:** ![Scott\_Dube](https://forums.tormach.com/letter_avatar_proxy/v4/letter/s/858c86/32.png) [@Scott\_Dube](https://forums.tormach.com/u/Scott_Dube)\
**Post date:** [October 17, 2025, 6:19pm UTC](https://forums.tormach.com/t/tool-sequence-on-an-15l-slant-pro/2748/4 "2025-10-17T18:19:28Z")

</div>

Couldn’t it be just the tool numbers in the offset table vs what is in their programs? How is the programing being done? Is it conversational or CAM software?

---

<div class="post-metadata">

**Author:** ![Bruce\_Kuller](https://forums.tormach.com/letter_avatar_proxy/v4/letter/b/edb3f5/32.png) [@Bruce\_Kuller](https://forums.tormach.com/u/Bruce_Kuller)\
**Post date:** [November 30, 2025, 11:31pm UTC](https://forums.tormach.com/t/tool-sequence-on-an-15l-slant-pro/2748/5 "2025-11-30T23:31:56Z")

</div>

Sorry didn’t see your reply.

I use #1 as a master. Tools in the table should reflect the order of what’s in each position. Cam tools reflect tool numbers in the machine. Should be mirror image to prevent crashes etc.
