# G code program

**URL:** <https://forums.tormach.com/t/g-code-program/985>\
**Category:** Mill\
**Tags:** programming\
**Created:** [June 21, 2023, 9:38pm UTC](https://forums.tormach.com/t/g-code-program/985 "2023-06-21T21:38:37Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Eric\_Helfgott](https://forums.tormach.com/letter_avatar_proxy/v4/letter/e/b77776/32.png) [@Eric\_Helfgott](https://forums.tormach.com/u/Eric_Helfgott)\
**Post date:** [June 21, 2023, 9:38pm UTC](https://forums.tormach.com/t/g-code-program/985/1 "2023-06-21T21:38:37Z")

</div>

Hello all  
Does Tormach have a service which is receiving a print and create a g-code for a user like me?  
Thankyou  
Eric Helfgott

---

<div class="post-metadata">

**Author:** ![Rogge](https://forums.tormach.com/user_avatar/forums.tormach.com/rogge/32/19_2.png) [@Rogge](https://forums.tormach.com/u/Rogge)\
**Post date:** [June 22, 2023, 1:57pm UTC](https://forums.tormach.com/t/g-code-program/985/2 "2023-06-22T13:57:10Z")

</div>

@Eric_Helfgott ,

Thanks for posting this question - it’s asked pretty frequently during pre-sales calls.

Tormach doesn’t offer such a service. If your part is simple you can program it right from the PathPilot controller. If you want to ‘try before you buy’ you can use our web simulator at [hub.pathpilot.com](http://hub.pathpilot.com) to see if you can make your part via our conversational programming interface.

Modern CAD/CAM software has gotten inexpensive and very easy to use. You might find it easier to have this one part programmed for you by a consultant, but in the long run you are _way_ better off learning some CAD/CAM. Imagine buying a table saw but then needing a consultant every time you wanted to adjust the fence. These tools are much more capable if you learn CAD/CAM.

Fusion 360 would be a good place to start - free trials, plenty of YouTube support. SprutCAM is more capable but a bit more complex. There are many other capable CAD/CAM packages out there, other forum users may offer their opinions.

Best of luck!

---

<div class="post-metadata">

**Author:** ![Bill\_Greathouse](https://forums.tormach.com/letter_avatar_proxy/v4/letter/b/7feea3/32.png) [@Bill\_Greathouse](https://forums.tormach.com/u/Bill_Greathouse)\
**Post date:** [June 25, 2023, 1:52pm UTC](https://forums.tormach.com/t/g-code-program/985/3 "2023-06-25T13:52:38Z")

</div>

Try fusion 360. This is its primary purpose.
