# Plasma

**URL:** https://forums.tormach.com/c/plasma/14.md

[Latest](https://forums.tormach.com/latest.md) · [Categories](https://forums.tormach.com/categories.md) · [Tags](https://forums.tormach.com/tags.md)

---

## [About the Plasma category](https://forums.tormach.com/t/about-the-plasma-category/128)

<div class="topic-metadata">

**Author:** [@SamBollen](https://forums.tormach.com/u/SamBollen)\
**Replies:** 0

</div>

Topics covering the 1300PL. The Plasma category is a discussion space for: Showing off your plasma projects Sharing plasma programs Asking questions and discussing potential answers Please try to tag your posts appro…

---

## [Water level gauge](https://forums.tormach.com/t/water-level-gauge/2504)

<div class="topic-metadata">

**Author:** [@John\_Block](https://forums.tormach.com/u/John_Block)\
**Replies:** 0\
**Last updated:** [June 25, 2025, 10:39pm UTC](https://forums.tormach.com/t/water-level-gauge/2504 "2025-06-25T22:39:44Z")

</div>

I created this little tool to make my life easier. My nephew also has a plasma table and when he saw my gauge he wanted one too. (Light bulb moment, hey maybe other people will want one). So go to http://www.ppsmfg.com…

---

## [Plasma diving during run](https://forums.tormach.com/t/plasma-diving-during-run/2346)

<div class="topic-metadata">

**Author:** [@Ryan\_Maicus](https://forums.tormach.com/u/Ryan_Maicus)\
**Replies:** 2\
**Last updated:** [April 1, 2025, 2:31pm UTC](https://forums.tormach.com/t/plasma-diving-during-run/2346 "2025-04-01T14:31:53Z")

</div>

Hello there! Running a plasma cutter but when its cutting It eventually runs into the metal. Attempted a dry run to make sure that motor is holding the head correctly. It is.

---

## [Reverse Flow Smoker](https://forums.tormach.com/t/reverse-flow-smoker/2040)

<div class="topic-metadata">

**Author:** [@Matthew\_Schultz1](https://forums.tormach.com/u/Matthew_Schultz1)\
**Replies:** 3\
**Last updated:** [December 2, 2024, 10:27pm UTC](https://forums.tormach.com/t/reverse-flow-smoker/2040 "2024-12-02T22:27:05Z")

</div>

After building my first offset smoker I received a lot of request for customized smokers from friends and family. I decided to take a commission job and build a reverse flow smoker. Unlike the offset smoker, a reverse f…

---

## [Plasma table 4th axis "hack"](https://forums.tormach.com/t/plasma-table-4th-axis-hack/2007)

<div class="topic-metadata">

**Author:** [@Ashraf\_Farrag](https://forums.tormach.com/u/Ashraf_Farrag)\
**Replies:** 3\
**Last updated:** [November 27, 2024, 10:37pm UTC](https://forums.tormach.com/t/plasma-table-4th-axis-hack/2007 "2024-11-27T22:37:43Z")

</div>

I don’t have a 1300PL but I’d put this together if I had a roll cage or chassis to build:

---

## [Arc ignition failures until disabling arc-ok check](https://forums.tormach.com/t/arc-ignition-failures-until-disabling-arc-ok-check/1812)

<div class="topic-metadata">

**Author:** [@Ron\_Olson](https://forums.tormach.com/u/Ron_Olson)\
**Replies:** 3\
**Last updated:** [September 30, 2024, 3:18pm UTC](https://forums.tormach.com/t/arc-ignition-failures-until-disabling-arc-ok-check/1812 "2024-09-30T15:18:25Z")

</div>

Hi all- We’ve been getting arc ignition failures with our 1300PL; we replaced the consumables, insured the piece was properly grounded, etc. Out of sheer desperation to get the machine going I disabled Enable Arc-Ok Che…

---

## [1300PL won't ref Z ... grinding sound](https://forums.tormach.com/t/1300pl-wont-ref-z-grinding-sound/1740)

<div class="topic-metadata">

**Author:** [@Ron\_Olson](https://forums.tormach.com/u/Ron_Olson)\
**Replies:** 3\
**Last updated:** [August 19, 2024, 1:40pm UTC](https://forums.tormach.com/t/1300pl-wont-ref-z-grinding-sound/1740 "2024-08-19T13:40:36Z")

</div>

Hi all- I have a new and interesting problem with our 1300PL. When you try to reference Z during table setup, the torch moves up, and I can hear a clicking sound of what I assume is the limit switch, then it just keeps …

---

## [How do you drain your table?](https://forums.tormach.com/t/how-do-you-drain-your-table/1570)

<div class="topic-metadata">

**Author:** [@Ron\_Olson](https://forums.tormach.com/u/Ron_Olson)\
**Replies:** 6\
**Last updated:** [May 13, 2024, 8:28pm UTC](https://forums.tormach.com/t/how-do-you-drain-your-table/1570 "2024-05-13T20:28:37Z")

</div>

Hey all- I’m curious how y’all clean your tables, specifically getting the water out. I want to drain our table to give the machine a good cleaning and replace the water/green cut mixture that’s gotten kinda nasty due t…

---

## [E-Stop switch loose, how to fix?](https://forums.tormach.com/t/e-stop-switch-loose-how-to-fix/1513)

<div class="topic-metadata">

**Author:** [@Ron\_Olson](https://forums.tormach.com/u/Ron_Olson)\
**Replies:** 2\
**Last updated:** [April 15, 2024, 10:29pm UTC](https://forums.tormach.com/t/e-stop-switch-loose-how-to-fix/1513 "2024-04-15T22:29:45Z")

</div>

Hi all! The estop button assembly on our 1300PL has come loose and spins around (pic at the bottom). To be clear, it’s not the e-stop button, that works, but the assembly it’s attached to, making it extremely difficul…

---

## [Making custom ventilation covers with the 1300PL Plasma Table](https://forums.tormach.com/t/making-custom-ventilation-covers-with-the-1300pl-plasma-table/188)

<div class="topic-metadata">

**Author:** [@Becky\_Zingler](https://forums.tormach.com/u/Becky_Zingler)\
**Replies:** 0\
**Last updated:** [August 25, 2022, 10:12pm UTC](https://forums.tormach.com/t/making-custom-ventilation-covers-with-the-1300pl-plasma-table/188 "2022-08-25T22:12:41Z")

</div>

Standard ventilation covers are boring, so I decided to design my own I drew these in Adobe Photoshop and transferred into Adobe Illustrator to export the files as dxf. While making these we discovered that i…

---

## [1300PL custom AutoFS preset not reflected in DRO fields](https://forums.tormach.com/t/1300pl-custom-autofs-preset-not-reflected-in-dro-fields/1117)

<div class="topic-metadata">

**Author:** [@Michael\_Skilton](https://forums.tormach.com/u/Michael_Skilton)\
**Replies:** 1\
**Last updated:** [September 22, 2023, 12:53pm UTC](https://forums.tormach.com/t/1300pl-custom-autofs-preset-not-reflected-in-dro-fields/1117 "2023-09-22T12:53:31Z")

</div>

I created a preset, named it in the popup and saved it. I can select it in the quality dropdown but when I do the DRO’s don’t change to the new values. Is there something else I’m missing?

---

## [Finished Offset Smoker](https://forums.tormach.com/t/finished-offset-smoker/1067)

<div class="topic-metadata">

**Author:** [@Matthew\_Schultz1](https://forums.tormach.com/u/Matthew_Schultz1)\
**Replies:** 3\
**Last updated:** [August 16, 2023, 9:33pm UTC](https://forums.tormach.com/t/finished-offset-smoker/1067 "2023-08-16T21:33:47Z")

</div>

Well after a few weeks of work on my offset smoker it is finally finished. I added a flat top cook range above the smoke box. I also made custom racks that slide in and out for easy access to the meat. I designed a charc…

---

## [What to do about gunk in the table](https://forums.tormach.com/t/what-to-do-about-gunk-in-the-table/893)

<div class="topic-metadata">

**Author:** [@Ron\_Olson](https://forums.tormach.com/u/Ron_Olson)\
**Replies:** 3\
**Last updated:** [May 4, 2023, 9:05pm UTC](https://forums.tormach.com/t/what-to-do-about-gunk-in-the-table/893 "2023-05-04T21:05:55Z")

</div>

Hey all- Our table is filled with Green Cut and water and I’m discovering this gunk floating about at the surface. I’m going to scoop it out, but I’m curious what the stuff is, if it’s a type of mold or something biolog…

---

## [Offset Smoker Door and Hinge Update](https://forums.tormach.com/t/offset-smoker-door-and-hinge-update/873)

<div class="topic-metadata">

**Author:** [@Matthew\_Schultz1](https://forums.tormach.com/u/Matthew_Schultz1)\
**Replies:** 3\
**Last updated:** [April 19, 2023, 12:24am UTC](https://forums.tormach.com/t/offset-smoker-door-and-hinge-update/873 "2023-04-19T00:24:21Z")

</div>

I was on spring break last week and was able to cut out some 1/4" plate to make the door and some hinges for the offset smoker. After completing it was quite evident that I will need to add a counter weight for the door…

---

## [Offset Smoker](https://forums.tormach.com/t/offset-smoker/861)

<div class="topic-metadata">

**Author:** [@Matthew\_Schultz1](https://forums.tormach.com/u/Matthew_Schultz1)\
**Replies:** 1\
**Last updated:** [April 6, 2023, 4:31pm UTC](https://forums.tormach.com/t/offset-smoker/861 "2023-04-06T16:31:06Z")

</div>

I have begun the fabrication on my first offset smoker project. I am making the octagon out of cold rolled 3/16 plate steel. The stack is 6" stainless 1/8" wall. The firebox is 2x2x2. It is not insulated, I went back and…

---

## [Rocket Stove Flat Top v1](https://forums.tormach.com/t/rocket-stove-flat-top-v1/817)

<div class="topic-metadata">

**Author:** [@Matthew\_Schultz1](https://forums.tormach.com/u/Matthew_Schultz1)\
**Replies:** 2\
**Last updated:** [April 6, 2023, 1:57pm UTC](https://forums.tormach.com/t/rocket-stove-flat-top-v1/817 "2023-04-06T13:57:23Z")

</div>

After my first rocket stove cut out on the PL1300 I decieded to try to make a flat top using the same design of the Rocket Stove base I previously used. I am calling this my BETA version 1. I loved making it, and learned…

---

## [Tormach vs Teknic Clearpath on Simple Warranty Issue (tl;dr; Customer Loses)](https://forums.tormach.com/t/tormach-vs-teknic-clearpath-on-simple-warranty-issue-tl-dr-customer-loses/812)

<div class="topic-metadata">

**Author:** [@Brian\_Boatright](https://forums.tormach.com/u/Brian_Boatright)\
**Replies:** 1\
**Last updated:** [April 3, 2023, 9:02pm UTC](https://forums.tormach.com/t/tormach-vs-teknic-clearpath-on-simple-warranty-issue-tl-dr-customer-loses/812 "2023-04-03T21:02:17Z")

</div>

Originally we had a problem with the x axis on the tormach 1300PL Plasma Table, it would vigorously shake back and forth like a feedback loop. We contacted Tormach about the issue on August 19th 2022 they requested video…

---

## [Material picker changes, additions, and overrides](https://forums.tormach.com/t/material-picker-changes-additions-and-overrides/841)

<div class="topic-metadata">

**Author:** [@Ron\_Olson](https://forums.tormach.com/u/Ron_Olson)\
**Replies:** 3\
**Last updated:** [April 3, 2023, 4:55pm UTC](https://forums.tormach.com/t/material-picker-changes-additions-and-overrides/841 "2023-04-03T16:55:24Z")

</div>

Hey all- We have the 1300PL with the Hypertherm 45XP and was wondering if the material settings can be added to as well as changed; we found we are getting better aluminum cuts by setting the speed a little faster. We’…

---

## [A few fun projects with my 1300Pl](https://forums.tormach.com/t/a-few-fun-projects-with-my-1300pl/512)

<div class="topic-metadata">

**Author:** [@Matthew\_Schultz1](https://forums.tormach.com/u/Matthew_Schultz1)\
**Replies:** 3\
**Last updated:** [December 16, 2022, 8:17am UTC](https://forums.tormach.com/t/a-few-fun-projects-with-my-1300pl/512 "2022-12-16T08:17:43Z")

</div>

I just wanted to share a few projects with my 1300 PL. I will post some more shortly. I am new to the forum and thought it would be cool to show the fun I am having. Here are some pictures of a fire pit I am working on. …

---

## [Quick look at a rocket stove cut on the PL](https://forums.tormach.com/t/quick-look-at-a-rocket-stove-cut-on-the-pl/513)

<div class="topic-metadata">

**Author:** [@Matthew\_Schultz1](https://forums.tormach.com/u/Matthew_Schultz1)\
**Replies:** 3\
**Last updated:** [December 14, 2022, 2:41pm UTC](https://forums.tormach.com/t/quick-look-at-a-rocket-stove-cut-on-the-pl/513 "2022-12-14T14:41:04Z")

</div>

Here is a few pictures of a rocket stove I cut out on the table. I will share more shortly. This was design I came up with a longer heat stack to better control my flame and retain heat. This is version two. I am workin…

---

## [Lead in and Lead Out with Plasma CNC?](https://forums.tormach.com/t/lead-in-and-lead-out-with-plasma-cnc/112)

<div class="topic-metadata">

**Author:** [@livinglightshows](https://forums.tormach.com/u/livinglightshows)\
**Replies:** 4\
**Last updated:** [December 14, 2022, 4:43am UTC](https://forums.tormach.com/t/lead-in-and-lead-out-with-plasma-cnc/112 "2022-12-14T04:43:54Z")

</div>

Just setting up my 1300PL and was wondering how others do lead-in and lead-out to prevent divots along the cut line when cutting with the plasma CNC?

---

## [Making a few organizers for the garage](https://forums.tormach.com/t/making-a-few-organizers-for-the-garage/178)

<div class="topic-metadata">

**Author:** [@nkowalczyk](https://forums.tormach.com/u/nkowalczyk)\
**Replies:** 1\
**Last updated:** [December 2, 2022, 3:59am UTC](https://forums.tormach.com/t/making-a-few-organizers-for-the-garage/178 "2022-12-02T03:59:07Z")

</div>

I’ve been on a bit of an organization kick for the past few weeks, and also wanted to get more familiar with the plasma, so last week I took a day to knock out both of those with one stone. I found a few designs I liked …

---

## [PLasma multiple cutting stops](https://forums.tormach.com/t/plasma-multiple-cutting-stops/158)

<div class="topic-metadata">

**Author:** [@cushmaca](https://forums.tormach.com/u/cushmaca)\
**Replies:** 16\
**Last updated:** [September 8, 2022, 5:47pm UTC](https://forums.tormach.com/t/plasma-multiple-cutting-stops/158 "2022-09-08T17:47:37Z")

</div>

Path pilot shows multiple starts and stops on flat work. Instead of test firing once and following patters, it stops every time it moves to new location, then refires causing a large hole then starts to cut new piece.

---

## [Vectric Aspire Post Processor?](https://forums.tormach.com/t/vectric-aspire-post-processor/114)

<div class="topic-metadata">

**Author:** [@livinglightshows](https://forums.tormach.com/u/livinglightshows)\
**Replies:** 4\
**Last updated:** [June 1, 2022, 4:54pm UTC](https://forums.tormach.com/t/vectric-aspire-post-processor/114 "2022-06-01T16:54:00Z")

</div>

Anyone using Vectric Aspire to create .nc files for the 1300PL Plasma CNC? What post processor do you use to add in the M200 and other unique codes that conversational adds to the .nc files when importing a .dxf?

---

## [No AutoFS presets for 1300PL less than 10ga](https://forums.tormach.com/t/no-autofs-presets-for-1300pl-less-than-10ga/110)

<div class="topic-metadata">

**Author:** [@livinglightshows](https://forums.tormach.com/u/livinglightshows)\
**Replies:** 2\
**Last updated:** [April 4, 2022, 9:30pm UTC](https://forums.tormach.com/t/no-autofs-presets-for-1300pl-less-than-10ga/110 "2022-04-04T21:30:54Z")

</div>

I noticed the list of presets for Auto FS on the 1300PL do not any presets for material thickness less than 10ga. Do they exist anywhere or does anyone have some they made that I can import?
